Zhangjiagang Hengli Technology Co.,Ltd
TOP EQUIPMENTS,TOP QUALITY.
Add to Cart
LD 90 Five-Roller Carbon Steel Pipe Machinery 90KW Steel Rolling Mill
This five roller continuous rolling mill is used for continuous cold rolling of copper rods.The rolls of this mill adopt short cantilever support and can be quickly replaced.The transmission system and bearings are lubricated by pressure oil,copper rods are cooled by emulsion,and it is assured that lubricating oil and cooling emulsion are completely separated.This equipment is reliable and low on maintenance cost. The line is composed of main motor, reducer box, rolling mechanism frames, thin-oil lubrication system, emulsion system, and take-up unit.
Featuring:
1. high efficiency, lower power consumption
2. capability of fining and reinforcing crystal structure of copper rods
3. Its operation is easy and flexible.
4. The rods to be rolled are introduced at crawl speed.
5. It can be reversed and be started at full load.
Specifications:
| No. | Name | LD90 |
|
| 1 | Shell OD(mm) | 35~114 | mm |
| 2 | Shell WT(mm) | ＜10 | mm |
| 3 | Shell Length(mm) | 6 | mm |
| 4 | Finished tube OD(mm) | 30~108 | mm |
| 5 | Finished tube WT(mm) | 0.2~8 | mm |
| 6 | Finished tube Length(m) | 15 | m |
| 7 | Stroke Frequency of Mill time/min | 40~80 | time/min |
| 8 | Stroke of Rolling mill bus(mm) | 752 | mm |
| 9 | Feeding Length(mm) | 2.7~10.3 | mm |
| 10 | rotation angle | 35° |
|
| 11 | Roll Diameter(mm) | 249 | mm |
| 12 | Power(KW) | 90 | KW |
| 13 | Size (L×W×H) | 40×4.6×2.5 | m |
